making a PUT request

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

making a PUT request

Greg Hemphill
Hi Everyone,

We are trying to make a PUT request for a RESTful web service.  There
doesn't seem to be a way to get the include_url tag to make a PUT
request, or maybe I'm missing something?  How does one get lasso to
send a request as a PUT vs a GET or POST?

Using Lasso 8.1 on this site.

Thanks,
Greg Hemphill

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <[hidden email]>.
To unsubscribe, E-mail to: <[hidden email]>
To switch to the DIGEST mode, E-mail to <[hidden email]>
To switch to the INDEX mode, E-mail to <[hidden email]>
Send administrative queries to  <[hidden email]>

Reply | Threaded
Open this post in threaded view
|

Re: making a PUT request

jasonhuck
I looked into this briefly when I was toying with CouchDB support. I'm
not aware of a trick or hack to make [include_url] use different
verbs. It's easily done with curl, though, so I'd probably write my
own little wrapper for curl, via [shell], that allowed me to pass
whatever options I needed.

- jason




On Wed, Oct 27, 2010 at 11:24 AM, Greg Hemphill <[hidden email]> wrote:

> Hi Everyone,
>
> We are trying to make a PUT request for a RESTful web service.  There
> doesn't seem to be a way to get the include_url tag to make a PUT
> request, or maybe I'm missing something?  How does one get lasso to
> send a request as a PUT vs a GET or POST?
>
> Using Lasso 8.1 on this site.
>
> Thanks,
> Greg Hemphill
>
> #############################################################
> This message is sent to you because you are subscribed to
>  the mailing list <[hidden email]>.
> To unsubscribe, E-mail to: <[hidden email]>
> To switch to the DIGEST mode, E-mail to <[hidden email]>
> To switch to the INDEX mode, E-mail to <[hidden email]>
> Send administrative queries to  <[hidden email]>
>
>

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <[hidden email]>.
To unsubscribe, E-mail to: <[hidden email]>
To switch to the DIGEST mode, E-mail to <[hidden email]>
To switch to the INDEX mode, E-mail to <[hidden email]>
Send administrative queries to  <[hidden email]>

Reply | Threaded
Open this post in threaded view
|

Re: making a PUT request

Marc Pope-2
I think his main prob is using 8.1 too, os_process is 8.5 only so no shell tag either, pass_thru is about only option I think.

On Oct 27, 2010, at 11:45 AM, Jason Huck <[hidden email]> wrote:

> I looked into this briefly when I was toying with CouchDB support. I'm
> not aware of a trick or hack to make [include_url] use different
> verbs. It's easily done with curl, though, so I'd probably write my
> own little wrapper for curl, via [shell], that allowed me to pass
> whatever options I needed.
>
> - jason
>
>
>
>
> On Wed, Oct 27, 2010 at 11:24 AM, Greg Hemphill <[hidden email]> wrote:
>> Hi Everyone,
>>
>> We are trying to make a PUT request for a RESTful web service.  There
>> doesn't seem to be a way to get the include_url tag to make a PUT
>> request, or maybe I'm missing something?  How does one get lasso to
>> send a request as a PUT vs a GET or POST?
>>
>> Using Lasso 8.1 on this site.
>>
>> Thanks,
>> Greg Hemphill
>>
>> #############################################################
>> This message is sent to you because you are subscribed to
>>  the mailing list <[hidden email]>.
>> To unsubscribe, E-mail to: <[hidden email]>
>> To switch to the DIGEST mode, E-mail to <[hidden email]>
>> To switch to the INDEX mode, E-mail to <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>>
>>
>
> #############################################################
> This message is sent to you because you are subscribed to
>  the mailing list <[hidden email]>.
> To unsubscribe, E-mail to: <[hidden email]>
> To switch to the DIGEST mode, E-mail to <[hidden email]>
> To switch to the INDEX mode, E-mail to <[hidden email]>
> Send administrative queries to  <[hidden email]>
>

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <[hidden email]>.
To unsubscribe, E-mail to: <[hidden email]>
To switch to the DIGEST mode, E-mail to <[hidden email]>
To switch to the INDEX mode, E-mail to <[hidden email]>
Send administrative queries to  <[hidden email]>

Reply | Threaded
Open this post in threaded view
|

Re: making a PUT request

Bil Corry-3
If 8.1 includes some type of networking tag ([net]?) then you can use it to do a PUT.  Been too long, don't remember anything before 8.5.6 :)

- Bil

Marc Pope wrote on 10/27/2010 8:50 AM:

> I think his main prob is using 8.1 too, os_process is 8.5 only so no shell tag either, pass_thru is about only option I think.
>
> On Oct 27, 2010, at 11:45 AM, Jason Huck <[hidden email]> wrote:
>
>> I looked into this briefly when I was toying with CouchDB support. I'm
>> not aware of a trick or hack to make [include_url] use different
>> verbs. It's easily done with curl, though, so I'd probably write my
>> own little wrapper for curl, via [shell], that allowed me to pass
>> whatever options I needed.
>>
>> - jason
>>
>>
>>
>>
>> On Wed, Oct 27, 2010 at 11:24 AM, Greg Hemphill <[hidden email]> wrote:
>>> Hi Everyone,
>>>
>>> We are trying to make a PUT request for a RESTful web service.  There
>>> doesn't seem to be a way to get the include_url tag to make a PUT
>>> request, or maybe I'm missing something?  How does one get lasso to
>>> send a request as a PUT vs a GET or POST?
>>>
>>> Using Lasso 8.1 on this site.
>>>



#############################################################
This message is sent to you because you are subscribed to
  the mailing list <[hidden email]>.
To unsubscribe, E-mail to: <[hidden email]>
To switch to the DIGEST mode, E-mail to <[hidden email]>
To switch to the INDEX mode, E-mail to <[hidden email]>
Send administrative queries to  <[hidden email]>

Reply | Threaded
Open this post in threaded view
|

Re: making a PUT request

Mark Lair
In reply to this post by Marc Pope-2
Thanks Guys.
Mark

On Oct 27, 2010, at 11:50 AM, Marc Pope wrote:

> I think his main prob is using 8.1 too, os_process is 8.5 only so no shell tag either, pass_thru is about only option I think.
>
> On Oct 27, 2010, at 11:45 AM, Jason Huck <[hidden email]> wrote:
>
>> I looked into this briefly when I was toying with CouchDB support. I'm
>> not aware of a trick or hack to make [include_url] use different
>> verbs. It's easily done with curl, though, so I'd probably write my
>> own little wrapper for curl, via [shell], that allowed me to pass
>> whatever options I needed.
>>
>> - jason
>>
>>
>>
>>
>> On Wed, Oct 27, 2010 at 11:24 AM, Greg Hemphill <[hidden email]> wrote:
>>> Hi Everyone,
>>>
>>> We are trying to make a PUT request for a RESTful web service.  There
>>> doesn't seem to be a way to get the include_url tag to make a PUT
>>> request, or maybe I'm missing something?  How does one get lasso to
>>> send a request as a PUT vs a GET or POST?
>>>
>>> Using Lasso 8.1 on this site.
>>>
>>> Thanks,
>>> Greg Hemphill
>>>
>>> #############################################################
>>> This message is sent to you because you are subscribed to
>>> the mailing list <[hidden email]>.
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> To switch to the DIGEST mode, E-mail to <[hidden email]>
>>> To switch to the INDEX mode, E-mail to <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>>
>>>
>>
>> #############################################################
>> This message is sent to you because you are subscribed to
>> the mailing list <[hidden email]>.
>> To unsubscribe, E-mail to: <[hidden email]>
>> To switch to the DIGEST mode, E-mail to <[hidden email]>
>> To switch to the INDEX mode, E-mail to <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>>
>
> #############################################################
> This message is sent to you because you are subscribed to
>  the mailing list <[hidden email]>.
> To unsubscribe, E-mail to: <[hidden email]>
> To switch to the DIGEST mode, E-mail to <[hidden email]>
> To switch to the INDEX mode, E-mail to <[hidden email]>
> Send administrative queries to  <[hidden email]>
>


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <[hidden email]>.
To unsubscribe, E-mail to: <[hidden email]>
To switch to the DIGEST mode, E-mail to <[hidden email]>
To switch to the INDEX mode, E-mail to <[hidden email]>
Send administrative queries to  <[hidden email]>