Re: Lasso 8.5.6 install on El Capitan

classic Classic list List threaded Threaded
16 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
Ok, I’m headed for trouble very quickly!

I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).

I did the following:
- Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
- Made the changes from below.  I had to change the lasso8.conf file:
        LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
To:
        LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.

Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)

In lassoerrors.txt file, I have the following:

[02/25/18 13:00:09] Restarted site process 1 default
[02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528


Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)

Should I re-run the installer for Lasso 8.5.6?


>>>>> It’s very simple … after some research
>>>>>
>>>>> Lasso 8.6 on El Capitan
>>>>> ———————————
>>>>>
>>>>> Download the latest Lasso8 installer and run it.
>>>>>
>>>>> Open the Terminal app.
>>>>>
>>>>> Check if you have this folder: /usr/local/libexec
>>>>>
>>>>> $ ls -l /usr/local/libexec/apache2
>>>>> total 792
>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>
>>>>> If not, create it.
>>>>>
>>>>> $ sudo mkdir /usr/local/libexec
>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>
>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>
>>>>>
>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>
>>>>> $ tail /etc/apache2/httpd.conf
>>>>> #Begin: Added by Lasso 8.6 installer
>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>> #End: Added by Lasso 8.6 installer
>>>>>
>>>>>
>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>
>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>
>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>
>>>>>
>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>> Enter the following commands in Terminal:
>>>>>
>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>
>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>> <plist version="1.0">
>>>>> <dict>
>>>>> <key>RunAtLoad</key>
>>>>> <true/>
>>>>> <key>Label</key>
>>>>> <string>com.lassosoft.lasso8</string>
>>>>> <key>ProgramArguments</key>
>>>>> <array>
>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>> </array>
>>>>> </dict>
>>>>> </plist>
>>>>>
>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>
>>>>>
>>>>> That should do it.
>>>>>
>>>>> - -
>>>>> Regards,
>>>>> Marc Vos
>>>>>


James Sheffer
[hidden email]
www.higherpowered.com
469-256-0268






#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Steffan A. Cline
Did you turn off SIM?



Steffan A. Cline
[hidden email]
602-793-0014




> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>
> Ok, I’m headed for trouble very quickly!
>
> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>
> I did the following:
> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
> - Made the changes from below.  I had to change the lasso8.conf file:
> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
> To:
> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>
> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>
> In lassoerrors.txt file, I have the following:
>
> [02/25/18 13:00:09] Restarted site process 1 default
> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>
>
> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>
> Should I re-run the installer for Lasso 8.5.6?
>
>
>>>>>> It’s very simple … after some research
>>>>>>
>>>>>> Lasso 8.6 on El Capitan
>>>>>> ———————————
>>>>>>
>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>
>>>>>> Open the Terminal app.
>>>>>>
>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>
>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>> total 792
>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>
>>>>>> If not, create it.
>>>>>>
>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>
>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>
>>>>>>
>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>
>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>
>>>>>>
>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>
>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>
>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>
>>>>>>
>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>> Enter the following commands in Terminal:
>>>>>>
>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>
>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>> <plist version="1.0">
>>>>>> <dict>
>>>>>> <key>RunAtLoad</key>
>>>>>> <true/>
>>>>>> <key>Label</key>
>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>> <key>ProgramArguments</key>
>>>>>> <array>
>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>> </array>
>>>>>> </dict>
>>>>>> </plist>
>>>>>>
>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>
>>>>>>
>>>>>> That should do it.
>>>>>>
>>>>>> - -
>>>>>> Regards,
>>>>>> Marc Vos
>>>>>>
>
>
> James Sheffer
> [hidden email]
> www.higherpowered.com
> 469-256-0268
>
>
>
>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
Forgive my ignorance but what is SIM?

Sent from my iPhone

> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>
> Did you turn off SIM?
>
>
>
> Steffan A. Cline
> [hidden email]
> 602-793-0014
>
>
>
>
>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>
>> Ok, I’m headed for trouble very quickly!
>>
>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>
>> I did the following:
>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>> - Made the changes from below.  I had to change the lasso8.conf file:
>>    LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>> To:
>>    LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>
>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>
>> In lassoerrors.txt file, I have the following:
>>
>> [02/25/18 13:00:09] Restarted site process 1 default
>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>
>>
>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>
>> Should I re-run the installer for Lasso 8.5.6?
>>
>>
>>>>>>> It’s very simple … after some research
>>>>>>>
>>>>>>> Lasso 8.6 on El Capitan
>>>>>>> ———————————
>>>>>>>
>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>
>>>>>>> Open the Terminal app.
>>>>>>>
>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>
>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>> total 792
>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>
>>>>>>> If not, create it.
>>>>>>>
>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>
>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>
>>>>>>>
>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>
>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>
>>>>>>>
>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>
>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>
>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>
>>>>>>>
>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>> Enter the following commands in Terminal:
>>>>>>>
>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>
>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>> <plist version="1.0">
>>>>>>> <dict>
>>>>>>> <key>RunAtLoad</key>
>>>>>>> <true/>
>>>>>>> <key>Label</key>
>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>> <key>ProgramArguments</key>
>>>>>>> <array>
>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>> </array>
>>>>>>> </dict>
>>>>>>> </plist>
>>>>>>>
>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>
>>>>>>>
>>>>>>> That should do it.
>>>>>>>
>>>>>>> - -
>>>>>>> Regards,
>>>>>>> Marc Vos
>>>>>>>
>>
>>
>> James Sheffer
>> [hidden email]
>> www.higherpowered.com
>> 469-256-0268
>>
>>
>>
>>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>> the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Steffan A. Cline
Sorry… SIP System Integrity Protection



Steffan A. Cline
[hidden email]
602-793-0014




> On Feb 25, 2018, at 12:42 PM, James Sheffer <[hidden email]> wrote:
>
> Forgive my ignorance but what is SIM?
>
> Sent from my iPhone
>
>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>
>> Did you turn off SIM?
>>
>>
>>
>> Steffan A. Cline
>> [hidden email]
>> 602-793-0014
>>
>>
>>
>>
>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>
>>> Ok, I’m headed for trouble very quickly!
>>>
>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>
>>> I did the following:
>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>   LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>> To:
>>>   LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>
>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>
>>> In lassoerrors.txt file, I have the following:
>>>
>>> [02/25/18 13:00:09] Restarted site process 1 default
>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>
>>>
>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>
>>> Should I re-run the installer for Lasso 8.5.6?
>>>
>>>
>>>>>>>> It’s very simple … after some research
>>>>>>>>
>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>> ———————————
>>>>>>>>
>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>
>>>>>>>> Open the Terminal app.
>>>>>>>>
>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>
>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>> total 792
>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>
>>>>>>>> If not, create it.
>>>>>>>>
>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>
>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>
>>>>>>>>
>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>
>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>
>>>>>>>>
>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>
>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>
>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>
>>>>>>>>
>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>
>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>
>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>> <plist version="1.0">
>>>>>>>> <dict>
>>>>>>>> <key>RunAtLoad</key>
>>>>>>>> <true/>
>>>>>>>> <key>Label</key>
>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>> <key>ProgramArguments</key>
>>>>>>>> <array>
>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>> </array>
>>>>>>>> </dict>
>>>>>>>> </plist>
>>>>>>>>
>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>
>>>>>>>>
>>>>>>>> That should do it.
>>>>>>>>
>>>>>>>> - -
>>>>>>>> Regards,
>>>>>>>> Marc Vos
>>>>>>>>
>>>
>>>
>>> James Sheffer
>>> [hidden email]
>>> www.higherpowered.com
>>> 469-256-0268
>>>
>>>
>>>
>>>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>> the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>> the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
In reply to this post by James Sheffer
One other thing- Lasso is running according to activity monitor.

Sent from my iPhone

> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>
> Forgive my ignorance but what is SIM?
>
> Sent from my iPhone
>
>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>
>> Did you turn off SIM?
>>
>>
>>
>> Steffan A. Cline
>> [hidden email]
>> 602-793-0014
>>
>>
>>
>>
>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>
>>> Ok, I’m headed for trouble very quickly!
>>>
>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>
>>> I did the following:
>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>   LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>> To:
>>>   LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>
>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>
>>> In lassoerrors.txt file, I have the following:
>>>
>>> [02/25/18 13:00:09] Restarted site process 1 default
>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>
>>>
>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>
>>> Should I re-run the installer for Lasso 8.5.6?
>>>
>>>
>>>>>>>> It’s very simple … after some research
>>>>>>>>
>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>> ———————————
>>>>>>>>
>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>
>>>>>>>> Open the Terminal app.
>>>>>>>>
>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>
>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>> total 792
>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>
>>>>>>>> If not, create it.
>>>>>>>>
>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>
>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>
>>>>>>>>
>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>
>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>
>>>>>>>>
>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>
>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>
>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>
>>>>>>>>
>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>
>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>
>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>> <plist version="1.0">
>>>>>>>> <dict>
>>>>>>>> <key>RunAtLoad</key>
>>>>>>>> <true/>
>>>>>>>> <key>Label</key>
>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>> <key>ProgramArguments</key>
>>>>>>>> <array>
>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>> </array>
>>>>>>>> </dict>
>>>>>>>> </plist>
>>>>>>>>
>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>
>>>>>>>>
>>>>>>>> That should do it.
>>>>>>>>
>>>>>>>> - -
>>>>>>>> Regards,
>>>>>>>> Marc Vos
>>>>>>>>
>>>
>>>
>>> James Sheffer
>>> [hidden email]
>>> www.higherpowered.com
>>> 469-256-0268
>>>
>>>
>>>
>>>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>> the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>> the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
Any other suggestions?

Thanks again so much for the help!!!

James

> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>
> One other thing- Lasso is running according to activity monitor.
>
> Sent from my iPhone
>
>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>
>> Forgive my ignorance but what is SIM?
>>
>> Sent from my iPhone
>>
>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>
>>> Did you turn off SIM?
>>>
>>>
>>>
>>> Steffan A. Cline
>>> [hidden email]
>>> 602-793-0014
>>>
>>>
>>>
>>>
>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> Ok, I’m headed for trouble very quickly!
>>>>
>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>
>>>> I did the following:
>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>  LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>> To:
>>>>  LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>
>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>
>>>> In lassoerrors.txt file, I have the following:
>>>>
>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>
>>>>
>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>
>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>
>>>>
>>>>>>>>> It’s very simple … after some research
>>>>>>>>>
>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>> ———————————
>>>>>>>>>
>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>
>>>>>>>>> Open the Terminal app.
>>>>>>>>>
>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>
>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>> total 792
>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>
>>>>>>>>> If not, create it.
>>>>>>>>>
>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>
>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>
>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>
>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>
>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>
>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>
>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>> <plist version="1.0">
>>>>>>>>> <dict>
>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>> <true/>
>>>>>>>>> <key>Label</key>
>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>> <array>
>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>> </array>
>>>>>>>>> </dict>
>>>>>>>>> </plist>
>>>>>>>>>
>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> That should do it.
>>>>>>>>>
>>>>>>>>> - -
>>>>>>>>> Regards,
>>>>>>>>> Marc Vos
>>>>>>>>>
>>>>
>>>>
>>>> James Sheffer
>>>> [hidden email]
>>>> www.higherpowered.com
>>>> 469-256-0268
>>>>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
I now have this in the lasso errors file:

[02/25/18 13:15:02] Restarted site process 1 default
[02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583

[02/25/18 14:54:40] Restarted site process 1 default
[02/25/18 15:22:46] Initialize - Required

James

> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>
> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
> Any other suggestions?
>
> Thanks again so much for the help!!!
>
> James
>
>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>
>> One other thing- Lasso is running according to activity monitor.
>>
>> Sent from my iPhone
>>
>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>
>>> Forgive my ignorance but what is SIM?
>>>
>>> Sent from my iPhone
>>>
>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>
>>>> Did you turn off SIM?
>>>>
>>>>
>>>>
>>>> Steffan A. Cline
>>>> [hidden email]
>>>> 602-793-0014
>>>>
>>>>
>>>>
>>>>
>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> Ok, I’m headed for trouble very quickly!
>>>>>
>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>
>>>>> I did the following:
>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>> To:
>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>
>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>
>>>>> In lassoerrors.txt file, I have the following:
>>>>>
>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>
>>>>>
>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>
>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>
>>>>>
>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>
>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>> ———————————
>>>>>>>>>>
>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>
>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>
>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>
>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>> total 792
>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>
>>>>>>>>>> If not, create it.
>>>>>>>>>>
>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>
>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>
>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>
>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>
>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>
>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>
>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>> <plist version="1.0">
>>>>>>>>>> <dict>
>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>> <true/>
>>>>>>>>>> <key>Label</key>
>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>> <array>
>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>> </array>
>>>>>>>>>> </dict>
>>>>>>>>>> </plist>
>>>>>>>>>>
>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> That should do it.
>>>>>>>>>>
>>>>>>>>>> - -
>>>>>>>>>> Regards,
>>>>>>>>>> Marc Vos
>>>>>>>>>>
>>>>>
>>>>>
>>>>> James Sheffer
>>>>> [hidden email]
>>>>> www.higherpowered.com
>>>>> 469-256-0268
>>>>>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
Wow!

I still get an internal server error but can now get into the server admin app now!

James

> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>
> I now have this in the lasso errors file:
>
> [02/25/18 13:15:02] Restarted site process 1 default
> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>
> [02/25/18 14:54:40] Restarted site process 1 default
> [02/25/18 15:22:46] Initialize - Required
>
> James
>
>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>
>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>> Any other suggestions?
>>
>> Thanks again so much for the help!!!
>>
>> James
>>
>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>
>>> One other thing- Lasso is running according to activity monitor.
>>>
>>> Sent from my iPhone
>>>
>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> Forgive my ignorance but what is SIM?
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>
>>>>> Did you turn off SIM?
>>>>>
>>>>>
>>>>>
>>>>> Steffan A. Cline
>>>>> [hidden email]
>>>>> 602-793-0014
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>
>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>
>>>>>> I did the following:
>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>> To:
>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>
>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>
>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>
>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>
>>>>>>
>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>
>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>
>>>>>>
>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>
>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>> ———————————
>>>>>>>>>>>
>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>
>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>
>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>
>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>> total 792
>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>
>>>>>>>>>>> If not, create it.
>>>>>>>>>>>
>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>
>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>
>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>
>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>
>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>
>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>
>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>> <dict>
>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>> <true/>
>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>> <array>
>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>> </array>
>>>>>>>>>>> </dict>
>>>>>>>>>>> </plist>
>>>>>>>>>>>
>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> That should do it.
>>>>>>>>>>>
>>>>>>>>>>> - -
>>>>>>>>>>> Regards,
>>>>>>>>>>> Marc Vos
>>>>>>>>>>>
>>>>>>
>>>>>>
>>>>>> James Sheffer
>>>>>> [hidden email]
>>>>>> www.higherpowered.com
>>>>>> 469-256-0268
>>>>>>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>> the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
Doh!

In my “hurridness", I was on another lasso server - no server admin :-(


> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>
> Wow!
>
> I still get an internal server error but can now get into the server admin app now!
>
> James
>
>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>
>> I now have this in the lasso errors file:
>>
>> [02/25/18 13:15:02] Restarted site process 1 default
>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>
>> [02/25/18 14:54:40] Restarted site process 1 default
>> [02/25/18 15:22:46] Initialize - Required
>>
>> James
>>
>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>
>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>> Any other suggestions?
>>>
>>> Thanks again so much for the help!!!
>>>
>>> James
>>>
>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> One other thing- Lasso is running according to activity monitor.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> Forgive my ignorance but what is SIM?
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>
>>>>>> Did you turn off SIM?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Steffan A. Cline
>>>>>> [hidden email]
>>>>>> 602-793-0014
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>
>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>
>>>>>>> I did the following:
>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>> To:
>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>
>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>
>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>
>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>
>>>>>>>
>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>
>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>
>>>>>>>
>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>
>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>> ———————————
>>>>>>>>>>>>
>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>
>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>
>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>
>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>> total 792
>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>
>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>
>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>
>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>
>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>
>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>
>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>
>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>
>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>> <dict>
>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>> <true/>
>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>> <array>
>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>> </array>
>>>>>>>>>>>> </dict>
>>>>>>>>>>>> </plist>
>>>>>>>>>>>>
>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>
>>>>>>>>>>>> - -
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> James Sheffer
>>>>>>> [hidden email]
>>>>>>> www.higherpowered.com
>>>>>>> 469-256-0268
>>>>>>>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>> the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>> the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Laurent Gigon
Do we need to enabled back SIP (System Integrity Protection) after
Lasso install on Sierra?


Laurent

2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:

> Doh!
>
> In my “hurridness", I was on another lasso server - no server admin :-(
>
>
>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>
>> Wow!
>>
>> I still get an internal server error but can now get into the server admin app now!
>>
>> James
>>
>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>
>>> I now have this in the lasso errors file:
>>>
>>> [02/25/18 13:15:02] Restarted site process 1 default
>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>
>>> [02/25/18 14:54:40] Restarted site process 1 default
>>> [02/25/18 15:22:46] Initialize - Required
>>>
>>> James
>>>
>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>> Any other suggestions?
>>>>
>>>> Thanks again so much for the help!!!
>>>>
>>>> James
>>>>
>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> Forgive my ignorance but what is SIM?
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>
>>>>>>> Did you turn off SIM?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Steffan A. Cline
>>>>>>> [hidden email]
>>>>>>> 602-793-0014
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>
>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>
>>>>>>>> I did the following:
>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>> To:
>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>
>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>
>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>
>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>
>>>>>>>>
>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>
>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>
>>>>>>>>
>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>
>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>
>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>
>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>> total 792
>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>
>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>
>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>
>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>
>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>
>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>
>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>
>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>
>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>> <array>
>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>> </array>
>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>
>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>
>>>>>>>>>>>>> - -
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> James Sheffer
>>>>>>>> [hidden email]
>>>>>>>> www.higherpowered.com
>>>>>>>> 469-256-0268
>>>>>>>>
>>>>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>> the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>> the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>>  the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>   the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>

#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

James Sheffer
I would think it would be a good idea but haven’t done it yet.

I finally got Lasso 8.5.6 running in Sierra.  Once I’m finished setting up the server, I’ll post updated instructions of exactly what I did to get it to work.  Disabling SIP was one of the steps I didn’t know about until Steffan pointed it out and I “think” was the main problem with Lasso not wanting to install (I also had to  install Java 6).  I’m going to reenable it once finished and let you know if there are any problems (I don’t imagine why re-enabling SIP would cause any problems)…

James Sheffer
[hidden email]
www.higherpowered.com
469-256-0268





> On Feb 27, 2018, at 9:23 AM, Laurent G <[hidden email]> wrote:
>
> Do we need to enabled back SIP (System Integrity Protection) after
> Lasso install on Sierra?
>
>
> Laurent
>
> 2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:
>> Doh!
>>
>> In my “hurridness", I was on another lasso server - no server admin :-(
>>
>>
>>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>>
>>> Wow!
>>>
>>> I still get an internal server error but can now get into the server admin app now!
>>>
>>> James
>>>
>>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> I now have this in the lasso errors file:
>>>>
>>>> [02/25/18 13:15:02] Restarted site process 1 default
>>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>>
>>>> [02/25/18 14:54:40] Restarted site process 1 default
>>>> [02/25/18 15:22:46] Initialize - Required
>>>>
>>>> James
>>>>
>>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>>> Any other suggestions?
>>>>>
>>>>> Thanks again so much for the help!!!
>>>>>
>>>>> James
>>>>>
>>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>>
>>>>>> Sent from my iPhone
>>>>>>
>>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> Forgive my ignorance but what is SIM?
>>>>>>>
>>>>>>> Sent from my iPhone
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> Did you turn off SIM?
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> Steffan A. Cline
>>>>>>>> [hidden email]
>>>>>>>> 602-793-0014
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>>
>>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>>
>>>>>>>>> I did the following:
>>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>> To:
>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>>
>>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>>
>>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>>
>>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>>
>>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>>> total 792
>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>>> <array>
>>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>>> </array>
>>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> - -
>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> James Sheffer
>>>>>>>>> [hidden email]
>>>>>>>>> www.higherpowered.com
>>>>>>>>> 469-256-0268
>>>>>>>>>
>>>>>
>>>>>
>>>>> #############################################################
>>>>>
>>>>> This message is sent to you because you are subscribed to
>>>>> the mailing list Lasso [hidden email]
>>>>> Official list archives available at http://www.lassotalk.com
>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>> Send administrative queries to  <[hidden email]>
>>>>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>> the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>> the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>>  the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Laurent Gigon
I had this issue too when I tried to installed lasso8connectorforapache2.4.so
I had to disabled SIP in order to modify the recipient folder.

2018-02-27 15:10 GMT-05:00 James Sheffer <[hidden email]>:

> I would think it would be a good idea but haven’t done it yet.
>
> I finally got Lasso 8.5.6 running in Sierra.  Once I’m finished setting up the server, I’ll post updated instructions of exactly what I did to get it to work.  Disabling SIP was one of the steps I didn’t know about until Steffan pointed it out and I “think” was the main problem with Lasso not wanting to install (I also had to  install Java 6).  I’m going to reenable it once finished and let you know if there are any problems (I don’t imagine why re-enabling SIP would cause any problems)…
>
> James Sheffer
> [hidden email]
> www.higherpowered.com
> 469-256-0268
>
>
>
>
>
>> On Feb 27, 2018, at 9:23 AM, Laurent G <[hidden email]> wrote:
>>
>> Do we need to enabled back SIP (System Integrity Protection) after
>> Lasso install on Sierra?
>>
>>
>> Laurent
>>
>> 2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:
>>> Doh!
>>>
>>> In my “hurridness", I was on another lasso server - no server admin :-(
>>>
>>>
>>>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>>>
>>>> Wow!
>>>>
>>>> I still get an internal server error but can now get into the server admin app now!
>>>>
>>>> James
>>>>
>>>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> I now have this in the lasso errors file:
>>>>>
>>>>> [02/25/18 13:15:02] Restarted site process 1 default
>>>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>>>
>>>>> [02/25/18 14:54:40] Restarted site process 1 default
>>>>> [02/25/18 15:22:46] Initialize - Required
>>>>>
>>>>> James
>>>>>
>>>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>>>> Any other suggestions?
>>>>>>
>>>>>> Thanks again so much for the help!!!
>>>>>>
>>>>>> James
>>>>>>
>>>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>>>
>>>>>>> Sent from my iPhone
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> Forgive my ignorance but what is SIM?
>>>>>>>>
>>>>>>>> Sent from my iPhone
>>>>>>>>
>>>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> Did you turn off SIM?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Steffan A. Cline
>>>>>>>>> [hidden email]
>>>>>>>>> 602-793-0014
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>
>>>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>>>
>>>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>>>
>>>>>>>>>> I did the following:
>>>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>> To:
>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>>>
>>>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>>>
>>>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>>>
>>>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>>>
>>>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>>>> total 792
>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>>>> <array>
>>>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>>>> </array>
>>>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> - -
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> James Sheffer
>>>>>>>>>> [hidden email]
>>>>>>>>>> www.higherpowered.com
>>>>>>>>>> 469-256-0268
>>>>>>>>>>
>>>>>>
>>>>>>
>>>>>> #############################################################
>>>>>>
>>>>>> This message is sent to you because you are subscribed to
>>>>>> the mailing list Lasso [hidden email]
>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>> Send administrative queries to  <[hidden email]>
>>>>>
>>>>>
>>>>> #############################################################
>>>>>
>>>>> This message is sent to you because you are subscribed to
>>>>> the mailing list Lasso [hidden email]
>>>>> Official list archives available at http://www.lassotalk.com
>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>> Send administrative queries to  <[hidden email]>
>>>>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>> the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>>  the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>>  the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>   the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>

#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Laurent Gigon
Does anyone need Lasso8ConnectorforApache2.4.so ?

2018-02-27 15:18 GMT-05:00 Laurent G <[hidden email]>:

> I had this issue too when I tried to installed lasso8connectorforapache2.4.so
> I had to disabled SIP in order to modify the recipient folder.
>
> 2018-02-27 15:10 GMT-05:00 James Sheffer <[hidden email]>:
>> I would think it would be a good idea but haven’t done it yet.
>>
>> I finally got Lasso 8.5.6 running in Sierra.  Once I’m finished setting up the server, I’ll post updated instructions of exactly what I did to get it to work.  Disabling SIP was one of the steps I didn’t know about until Steffan pointed it out and I “think” was the main problem with Lasso not wanting to install (I also had to  install Java 6).  I’m going to reenable it once finished and let you know if there are any problems (I don’t imagine why re-enabling SIP would cause any problems)…
>>
>> James Sheffer
>> [hidden email]
>> www.higherpowered.com
>> 469-256-0268
>>
>>
>>
>>
>>
>>> On Feb 27, 2018, at 9:23 AM, Laurent G <[hidden email]> wrote:
>>>
>>> Do we need to enabled back SIP (System Integrity Protection) after
>>> Lasso install on Sierra?
>>>
>>>
>>> Laurent
>>>
>>> 2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:
>>>> Doh!
>>>>
>>>> In my “hurridness", I was on another lasso server - no server admin :-(
>>>>
>>>>
>>>>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>>>>
>>>>> Wow!
>>>>>
>>>>> I still get an internal server error but can now get into the server admin app now!
>>>>>
>>>>> James
>>>>>
>>>>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> I now have this in the lasso errors file:
>>>>>>
>>>>>> [02/25/18 13:15:02] Restarted site process 1 default
>>>>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>>>>
>>>>>> [02/25/18 14:54:40] Restarted site process 1 default
>>>>>> [02/25/18 15:22:46] Initialize - Required
>>>>>>
>>>>>> James
>>>>>>
>>>>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>>>>> Any other suggestions?
>>>>>>>
>>>>>>> Thanks again so much for the help!!!
>>>>>>>
>>>>>>> James
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>>>>
>>>>>>>> Sent from my iPhone
>>>>>>>>
>>>>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> Forgive my ignorance but what is SIM?
>>>>>>>>>
>>>>>>>>> Sent from my iPhone
>>>>>>>>>
>>>>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>>>>
>>>>>>>>>> Did you turn off SIM?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Steffan A. Cline
>>>>>>>>>> [hidden email]
>>>>>>>>>> 602-793-0014
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>>>>
>>>>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>>>>
>>>>>>>>>>> I did the following:
>>>>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>> To:
>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>>>>
>>>>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>>>>
>>>>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>>>>
>>>>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>>>>
>>>>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>>>>> total 792
>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>>>>> <array>
>>>>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>>>>> </array>
>>>>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> - -
>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> James Sheffer
>>>>>>>>>>> [hidden email]
>>>>>>>>>>> www.higherpowered.com
>>>>>>>>>>> 469-256-0268
>>>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> #############################################################
>>>>>>>
>>>>>>> This message is sent to you because you are subscribed to
>>>>>>> the mailing list Lasso [hidden email]
>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>
>>>>>>
>>>>>> #############################################################
>>>>>>
>>>>>> This message is sent to you because you are subscribed to
>>>>>> the mailing list Lasso [hidden email]
>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>> Send administrative queries to  <[hidden email]>
>>>>>
>>>>>
>>>>> #############################################################
>>>>>
>>>>> This message is sent to you because you are subscribed to
>>>>> the mailing list Lasso [hidden email]
>>>>> Official list archives available at http://www.lassotalk.com
>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>> Send administrative queries to  <[hidden email]>
>>>>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>>  the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>>  the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>>   the mailing list Lasso [hidden email]
>> Official list archives available at http://www.lassotalk.com
>> To unsubscribe, E-mail to: <[hidden email]>
>> Send administrative queries to  <[hidden email]>

#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Erik Vandermey - WebCentrix, Inc.
Sure, I could use the 2.4 connector.

Regards,
---
Erik VanderMey • [hidden email] <mailto:[hidden email]> • 630-206-2900 • (Messages/FaceTime: [hidden email] <mailto:[hidden email]>)
WebCentrix, Inc. • http://webcentrix.net <http://webcentrix.net/> • Web Hosting/Co-Location/Dedicated Servers  
Certified Lasso Developer (CLD) • Kerio Connect/Control/Operator Reseller



> On Feb 27, 2018, at 2:23 PM, Laurent G <[hidden email] <mailto:[hidden email]>> wrote:
>
> Does anyone need Lasso8ConnectorforApache2.4.so ?
>
> 2018-02-27 15:18 GMT-05:00 Laurent G <[hidden email] <mailto:[hidden email]>>:
>> I had this issue too when I tried to installed lasso8connectorforapache2.4.so
>> I had to disabled SIP in order to modify the recipient folder.
>>
>> 2018-02-27 15:10 GMT-05:00 James Sheffer <[hidden email] <mailto:[hidden email]>>:
>>> I would think it would be a good idea but haven’t done it yet.
>>>
>>> I finally got Lasso 8.5.6 running in Sierra.  Once I’m finished setting up the server, I’ll post updated instructions of exactly what I did to get it to work.  Disabling SIP was one of the steps I didn’t know about until Steffan pointed it out and I “think” was the main problem with Lasso not wanting to install (I also had to  install Java 6).  I’m going to reenable it once finished and let you know if there are any problems (I don’t imagine why re-enabling SIP would cause any problems)…
>>>
>>> James Sheffer
>>> [hidden email] <mailto:[hidden email]>
>>> www.higherpowered.com <http://www.higherpowered.com/>
>>> 469-256-0268
>>>
>>>
>>>
>>>
>>>
>>>> On Feb 27, 2018, at 9:23 AM, Laurent G <[hidden email]> wrote:
>>>>
>>>> Do we need to enabled back SIP (System Integrity Protection) after
>>>> Lasso install on Sierra?
>>>>
>>>>
>>>> Laurent
>>>>
>>>> 2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:
>>>>> Doh!
>>>>>
>>>>> In my “hurridness", I was on another lasso server - no server admin :-(
>>>>>
>>>>>
>>>>>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>>>>>
>>>>>> Wow!
>>>>>>
>>>>>> I still get an internal server error but can now get into the server admin app now!
>>>>>>
>>>>>> James
>>>>>>
>>>>>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> I now have this in the lasso errors file:
>>>>>>>
>>>>>>> [02/25/18 13:15:02] Restarted site process 1 default
>>>>>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>>>>>
>>>>>>> [02/25/18 14:54:40] Restarted site process 1 default
>>>>>>> [02/25/18 15:22:46] Initialize - Required
>>>>>>>
>>>>>>> James
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>>>>>> Any other suggestions?
>>>>>>>>
>>>>>>>> Thanks again so much for the help!!!
>>>>>>>>
>>>>>>>> James
>>>>>>>>
>>>>>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>>>>>
>>>>>>>>> Sent from my iPhone
>>>>>>>>>
>>>>>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>
>>>>>>>>>> Forgive my ignorance but what is SIM?
>>>>>>>>>>
>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>
>>>>>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Did you turn off SIM?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Steffan A. Cline
>>>>>>>>>>> [hidden email]
>>>>>>>>>>> 602-793-0014
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>>>>>
>>>>>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>>>>>
>>>>>>>>>>>> I did the following:
>>>>>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>> To:
>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>>>>>
>>>>>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>>>>>
>>>>>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>>>>>
>>>>>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>>>>>
>>>>>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>>>>>> total 792
>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>>>>>> <array>
>>>>>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>>>>>> </array>
>>>>>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> - -
>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> James Sheffer
>>>>>>>>>>>> [hidden email]
>>>>>>>>>>>> www.higherpowered.com
>>>>>>>>>>>> 469-256-0268
>>>>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> #############################################################
>>>>>>>>
>>>>>>>> This message is sent to you because you are subscribed to
>>>>>>>> the mailing list Lasso [hidden email]
>>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>>
>>>>>>>
>>>>>>> #############################################################
>>>>>>>
>>>>>>> This message is sent to you because you are subscribed to
>>>>>>> the mailing list Lasso [hidden email]
>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>
>>>>>>
>>>>>> #############################################################
>>>>>>
>>>>>> This message is sent to you because you are subscribed to
>>>>>> the mailing list Lasso [hidden email]
>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>> Send administrative queries to  <[hidden email]>
>>>>>
>>>>>
>>>>> #############################################################
>>>>>
>>>>> This message is sent to you because you are subscribed to
>>>>> the mailing list Lasso [hidden email]
>>>>> Official list archives available at http://www.lassotalk.com
>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>> Send administrative queries to  <[hidden email]>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>> the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>>
>>>
>>> #############################################################
>>>
>>> This message is sent to you because you are subscribed to
>>>  the mailing list Lasso [hidden email]
>>> Official list archives available at http://www.lassotalk.com
>>> To unsubscribe, E-mail to: <[hidden email]>
>>> Send administrative queries to  <[hidden email]>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>  the mailing list Lasso [hidden email] <mailto:[hidden email]>
> Official list archives available at http://www.lassotalk.com <http://www.lassotalk.com/>
> To unsubscribe, E-mail to: <[hidden email] <mailto:[hidden email]>>
> Send administrative queries to  <[hidden email] <mailto:[hidden email]>>


#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Laurent Gigon
Here is a link to download :
https://www.dropbox.com/s/nij2695elcfqxqe/Lasso_8_Connectors_for_Apache_2.4.zip?dl=0

Laurent

2018-03-26 15:55 GMT-04:00 Erik Vandermey <[hidden email]>:

> Sure, I could use the 2.4 connector.
>
> Regards,
> ---
> Erik VanderMey • [hidden email] <mailto:[hidden email]> • 630-206-2900 • (Messages/FaceTime: [hidden email] <mailto:[hidden email]>)
> WebCentrix, Inc. • http://webcentrix.net <http://webcentrix.net/> • Web Hosting/Co-Location/Dedicated Servers
> Certified Lasso Developer (CLD) • Kerio Connect/Control/Operator Reseller
>
>
>
>> On Feb 27, 2018, at 2:23 PM, Laurent G <[hidden email] <mailto:[hidden email]>> wrote:
>>
>> Does anyone need Lasso8ConnectorforApache2.4.so ?
>>
>> 2018-02-27 15:18 GMT-05:00 Laurent G <[hidden email] <mailto:[hidden email]>>:
>>> I had this issue too when I tried to installed lasso8connectorforapache2.4.so
>>> I had to disabled SIP in order to modify the recipient folder.
>>>
>>> 2018-02-27 15:10 GMT-05:00 James Sheffer <[hidden email] <mailto:[hidden email]>>:
>>>> I would think it would be a good idea but haven’t done it yet.
>>>>
>>>> I finally got Lasso 8.5.6 running in Sierra.  Once I’m finished setting up the server, I’ll post updated instructions of exactly what I did to get it to work.  Disabling SIP was one of the steps I didn’t know about until Steffan pointed it out and I “think” was the main problem with Lasso not wanting to install (I also had to  install Java 6).  I’m going to reenable it once finished and let you know if there are any problems (I don’t imagine why re-enabling SIP would cause any problems)…
>>>>
>>>> James Sheffer
>>>> [hidden email] <mailto:[hidden email]>
>>>> www.higherpowered.com <http://www.higherpowered.com/>
>>>> 469-256-0268
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>> On Feb 27, 2018, at 9:23 AM, Laurent G <[hidden email]> wrote:
>>>>>
>>>>> Do we need to enabled back SIP (System Integrity Protection) after
>>>>> Lasso install on Sierra?
>>>>>
>>>>>
>>>>> Laurent
>>>>>
>>>>> 2018-02-25 16:43 GMT-05:00 James Sheffer <[hidden email]>:
>>>>>> Doh!
>>>>>>
>>>>>> In my “hurridness", I was on another lasso server - no server admin :-(
>>>>>>
>>>>>>
>>>>>>> On Feb 25, 2018, at 1:34 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>
>>>>>>> Wow!
>>>>>>>
>>>>>>> I still get an internal server error but can now get into the server admin app now!
>>>>>>>
>>>>>>> James
>>>>>>>
>>>>>>>> On Feb 25, 2018, at 1:28 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>
>>>>>>>> I now have this in the lasso errors file:
>>>>>>>>
>>>>>>>> [02/25/18 13:15:02] Restarted site process 1 default
>>>>>>>> [02/25/18 14:54:38] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 583
>>>>>>>>
>>>>>>>> [02/25/18 14:54:40] Restarted site process 1 default
>>>>>>>> [02/25/18 15:22:46] Initialize - Required
>>>>>>>>
>>>>>>>> James
>>>>>>>>
>>>>>>>>> On Feb 25, 2018, at 1:27 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>
>>>>>>>>> Ok, turned SIP off.  Same problem.  I’m thinking with this off, I should reinstall Lasso and try again?  Should I uninstall first?
>>>>>>>>> Any other suggestions?
>>>>>>>>>
>>>>>>>>> Thanks again so much for the help!!!
>>>>>>>>>
>>>>>>>>> James
>>>>>>>>>
>>>>>>>>>> On Feb 25, 2018, at 11:45 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>
>>>>>>>>>> One other thing- Lasso is running according to activity monitor.
>>>>>>>>>>
>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>
>>>>>>>>>>> On Feb 25, 2018, at 11:42 AM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Forgive my ignorance but what is SIM?
>>>>>>>>>>>
>>>>>>>>>>> Sent from my iPhone
>>>>>>>>>>>
>>>>>>>>>>>> On Feb 25, 2018, at 11:18 AM, Steffan A. Cline <[hidden email]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Did you turn off SIM?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Steffan A. Cline
>>>>>>>>>>>> [hidden email]
>>>>>>>>>>>> 602-793-0014
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> On Feb 25, 2018, at 12:14 PM, James Sheffer <[hidden email]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ok, I’m headed for trouble very quickly!
>>>>>>>>>>>>>
>>>>>>>>>>>>> I’m still trying to get Lasso 8.5.6 to run in Sierra (since people got it running in Sierra just the same as El Capitan, I upgraded the server to Sierra (not High Sierra!).
>>>>>>>>>>>>>
>>>>>>>>>>>>> I did the following:
>>>>>>>>>>>>> - Installed snow leopard (8.5.6) and installed Lasso.  Then upgraded through to Sierra.
>>>>>>>>>>>>> - Made the changes from below.  I had to change the lasso8.conf file:
>>>>>>>>>>>>> LoadModule lasso8_module /usr/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>> To:
>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>> ** The Lasso8.conf file had /usr/libexec - I added the “local” which is where I put the connector file so Apache would load.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Now Apache loads but I get an internal server error when trying to load a simple lasso page (no errors in the apachectl configtest)
>>>>>>>>>>>>>
>>>>>>>>>>>>> In lassoerrors.txt file, I have the following:
>>>>>>>>>>>>>
>>>>>>>>>>>>> [02/25/18 13:00:09] Restarted site process 1 default
>>>>>>>>>>>>> [02/25/18 13:00:15] Failed to hand socket to child. errno: 32 strerror: "Broken pipe" site id: 1 site pid: 528
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Anyone have any ideas?  I’ve got 2 more days to get this working or all authorize.net <http://authorize.net/> calls will fail :-)
>>>>>>>>>>>>>
>>>>>>>>>>>>> Should I re-run the installer for Lasso 8.5.6?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> It’s very simple … after some research
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Lasso 8.6 on El Capitan
>>>>>>>>>>>>>>>>>> ———————————
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Download the latest Lasso8 installer and run it.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Open the Terminal app.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Check if you have this folder: /usr/local/libexec
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> $ ls -l /usr/local/libexec/apache2
>>>>>>>>>>>>>>>>>> total 792
>>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 117008 11 okt 2015 Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 142468 11 okt 2015 Lasso8ConnectorforApache2.4.so
>>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 44416 24 mrt 19:55 mod_lasso9-2.4.so
>>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 34252 11 okt 2015 mod_lasso9.10.10.so
>>>>>>>>>>>>>>>>>> -rwxr-xr-x 1 root wheel 58428 11 okt 2015 mod_lasso9.so
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> If not, create it.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec
>>>>>>>>>>>>>>>>>> $ sudo mkdir /usr/local/libexec/apache2
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> and copy the 'Lasso8ConnectorforApache2.4.so' into that folder. Scan Lassotalk for a download link.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Look in /etc/apache2/httpd.conf and check the end of that file. It should have the following 3 lines:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> $ tail /etc/apache2/httpd.conf
>>>>>>>>>>>>>>>>>> #Begin: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>>>> Include /private/etc/apache2/users/lasso8.conf
>>>>>>>>>>>>>>>>>> #End: Added by Lasso 8.6 installer
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Next, edit file /etc/apache2/users/lasso8.conf and look at the 'LoadModule’-line. It should look like this:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> LoadModule lasso8_module /usr/local/libexec/apache2/Lasso8ConnectorforApache2.2.so
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Change the 'Lasso8ConnectorforApache2.2.so' into 'Lasso8ConnectorforApache2.4.so'
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> For Lasso 8 to start when OS X starts, since Mac OS 10.10 you need a LaunchDaemon plist.
>>>>>>>>>>>>>>>>>> Enter the following commands in Terminal:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> $ sudo vi /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> <?xml version="1.0" encoding="UTF-8"?>
>>>>>>>>>>>>>>>>>> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
>>>>>>>>>>>>>>>>>> <plist version="1.0">
>>>>>>>>>>>>>>>>>> <dict>
>>>>>>>>>>>>>>>>>> <key>RunAtLoad</key>
>>>>>>>>>>>>>>>>>> <true/>
>>>>>>>>>>>>>>>>>> <key>Label</key>
>>>>>>>>>>>>>>>>>> <string>com.lassosoft.lasso8</string>
>>>>>>>>>>>>>>>>>> <key>ProgramArguments</key>
>>>>>>>>>>>>>>>>>> <array>
>>>>>>>>>>>>>>>>>> <string>/Applications/Lasso Professional 8/LassoAdmin/Lasso8Service.sh</string>
>>>>>>>>>>>>>>>>>> </array>
>>>>>>>>>>>>>>>>>> </dict>
>>>>>>>>>>>>>>>>>> </plist>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> $ sudo chown root:wheel /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>> $ sudo chmod 644 /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>> $ sudo launchctl load -w /Library/LaunchDaemons/com.lassosoft.lasso8.plist
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> That should do it.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> - -
>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>> Marc Vos
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> James Sheffer
>>>>>>>>>>>>> [hidden email]
>>>>>>>>>>>>> www.higherpowered.com
>>>>>>>>>>>>> 469-256-0268
>>>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> #############################################################
>>>>>>>>>
>>>>>>>>> This message is sent to you because you are subscribed to
>>>>>>>>> the mailing list Lasso [hidden email]
>>>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>>>
>>>>>>>>
>>>>>>>> #############################################################
>>>>>>>>
>>>>>>>> This message is sent to you because you are subscribed to
>>>>>>>> the mailing list Lasso [hidden email]
>>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>>
>>>>>>>
>>>>>>> #############################################################
>>>>>>>
>>>>>>> This message is sent to you because you are subscribed to
>>>>>>> the mailing list Lasso [hidden email]
>>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>>> Send administrative queries to  <[hidden email]>
>>>>>>
>>>>>>
>>>>>> #############################################################
>>>>>>
>>>>>> This message is sent to you because you are subscribed to
>>>>>> the mailing list Lasso [hidden email]
>>>>>> Official list archives available at http://www.lassotalk.com
>>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>>> Send administrative queries to  <[hidden email]>
>>>>>
>>>>> #############################################################
>>>>>
>>>>> This message is sent to you because you are subscribed to
>>>>> the mailing list Lasso [hidden email]
>>>>> Official list archives available at http://www.lassotalk.com
>>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>>> Send administrative queries to  <[hidden email]>
>>>>
>>>>
>>>> #############################################################
>>>>
>>>> This message is sent to you because you are subscribed to
>>>>  the mailing list Lasso [hidden email]
>>>> Official list archives available at http://www.lassotalk.com
>>>> To unsubscribe, E-mail to: <[hidden email]>
>>>> Send administrative queries to  <[hidden email]>
>>
>> #############################################################
>>
>> This message is sent to you because you are subscribed to
>>  the mailing list Lasso [hidden email] <mailto:[hidden email]>
>> Official list archives available at http://www.lassotalk.com <http://www.lassotalk.com/>
>> To unsubscribe, E-mail to: <[hidden email] <mailto:[hidden email]>>
>> Send administrative queries to  <[hidden email] <mailto:[hidden email]>>
>
>
> #############################################################
>
> This message is sent to you because you are subscribed to
>   the mailing list Lasso [hidden email]
> Official list archives available at http://www.lassotalk.com
> To unsubscribe, E-mail to: <[hidden email]>
> Send administrative queries to  <[hidden email]>

#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>
Reply | Threaded
Open this post in threaded view
|

Re: Lasso 8.5.6 install on El Capitan

Mike Ealy-2
In reply to this post by James Sheffer
James, glad to see you were able to get Lasso 8.5.6 running in Sierra. I'm
going to attempt upgrading Lasso 8.5.6 from Snow Leopard to Sierra as well,
but I have a few questions first.

Did you turn SIP back on, if not, why?

You mentioned having to compile the Apache connector after replacing
"remote_ip" with "client_ip". Is this necessary or can I just download the
Lasso_8_Connectors_for_Apache_2.4.zip file from the link Laurent provided
and use as is?

What hardware are you running this on?

I may have missed it in the thread but did you have to reinstall 8.5.6?

Did you start with a fresh version of Sierra or did you upgrade Snow Leopard
from a previous version? What OS upgrade path did you use?

Thanks so much,
Mike Ealy



> I would think it would be a good idea but haven¹t done it yet.

I finally got
> Lasso 8.5.6 running in Sierra.  Once I¹m finished setting up the server, I¹ll
> post updated instructions of exactly what I did to get it to work.  Disabling
> SIP was one of the steps I didn¹t know about until Steffan pointed it out and
> I ³think² was the main problem with Lasso not wanting to install (I also had
> to  install Java 6).  I¹m going to reenable it once finished and let you know
> if there are any problems (I don¹t imagine why re-enabling SIP would cause any
> problems)Š

James
>
> James Sheffer
> [hidden email]
> www.higherpowered.com
> 469-256-0268



#############################################################

This message is sent to you because you are subscribed to
  the mailing list Lasso [hidden email]
Official list archives available at http://www.lassotalk.com
To unsubscribe, E-mail to: <[hidden email]>
Send administrative queries to  <[hidden email]>